Canon imageRUNNER 3300 Series Copying Manual page 54

• When you select "Double" (Left)
Originals
1
• When you select "Saddle Stitch"
Originals
IMPORTANT
•
You cannot select the position to be stapled when the Finisher-J1 (option) is attached. (See the
Reference Guide for staple position.)
•
Folds may appear differently depending on the type or quantity of paper.
NOTE
•
You must place the completed original as a Booklet, as shown in the above illustration. (See
'Making Copies for Use as a Booklet (Booklet),' on p. 2-11.)
•
"Saddle Stitch" can only be set when the 1 2-Sided or 2 2-Sided mode is selected. (See 'Two-
sided Copying (Two-sided Mode),' on p. 1-56.)
1-46 Collating Copies (Finisher)
Three sets of
specified copies
1
2
3
4
Copy set 1
Three sets of
specified copies
8 1
6 3
Copy set 1 Copy set 2
Copy set 2
Copy set 3
Copy set 3