Canon imageRUNNER 3300 Series Copying Manual page 49

■ Automatically Specifying the Copy Ratio (Auto XY Zoom)
The XY copy ratio is automatically set to suit the size of the selected paper.
Original
LTR
IMPORTANT
•
You cannot copy highly transparent originals, such as transparencies, in the Auto XY Zoom mode. To
make such copies, specify the copy ratio.
•
If you set the Auto XY Zoom mode, select the paper size by the Manual Paper Selection mode. If you
do not select the paper size, the copy ratio is automatically set to the size of the paper set in the top
paper drawer.
•
When you set the copy ratio in the Auto XY Zoom mode, Auto Orientation is not performed.
NOTE
•
If you specify a magnification of smaller than 25%, a message appears telling you to set it to
25%. If you specify a magnification of larger than 800%, a message appears telling you to set it
to 800%.
•
If an error occurs between the Auto XY Zoom copy ratio and the actual copy size, you can perform
an adjustment of this with the Zoom Fine Adjustment function. (See the Reference Guide.)
1
Place your originals, and press "Copy Ratio."
NOTE
•
When the ratio is larger than 400%, place the original on the platen glass.
LTRR selected
Changing the Copy Ratio (Copy Ratio)
Copy
LTRR
1
1-41