Making One-Sided Copies From Two-Sided Originals (2 1-Sided) - Canon imageRUNNER 3300 Series Copying Manual

4
Press
When the original is placed on the platen glass, follow the instructions that appear in the
screen and press
"Done."
Copying starts.
NOTE
To cancel the setting, press "Two-sided Mode" A "Cancel," in this order.
•
•
To cancel all settings and return the machine to the Standard mode, press
Making One-sided Copies from Two-sided Originals
(2 1-Sided)
This feature enables you to copy two-sided original onto one side of the paper.
Original
IMPORTANT
•
Be sure to set horizontally a LTRR or STMTR landscape-oriented original. If you set it vertically and
copy, the top sides of the front and rear sides are copied in opposite directions.
NOTE
•
To copy two-sided originals using the platen glass, use the Job Build mode of Special Features.
(See 'Copying Separately-set Originals (Job Build),' on p. 2-45.)
(Start).
(Start) once for each original. When scanning is completed, press
Copy
Two-sided Copying (Two-sided Mode)
1
(Reset).
1-61