Changing The Parameter Setting Value - Mitsubishi Electric F700 Instruction Manual

3.2.7

Changing the parameter setting value

Changing example Change the Pr. 1 Maximum frequency .
1.
Screen at powering on
The monitor display appears.
2.
Press to choose the PU operation
mode.
3.
Press
setting mode.
4.
5.
Press to read the present set value.
" "(initial value) appears.
6.
Turn to change it to the set
value "
7.
Press to set.
to
appears. ...... Write disable error
appears. ...... Write error during operation
appears. ...... Calibration error
appears. ...... Mode designation error
For details refer to page 104.
REMARKS
⋅ The number of digits displayed on the operation panel (FR-DU07) is four. Only the upper four digits of values can be displayed
and set. If the values to be displayed have five digits or more including decimal places, the fifth or later numerals cannot be
displayed nor set.
(Example) When Pr.1
When 60Hz is set, 60.00 is displayed.
When 120Hz is set, 120.0 is displayed. The second decimal places cannot be displayed nor set.
Operation
to choose the parameter
Pr. 1) appears.
".
· Turn to read another parameter.
· Press to show the setting again.
· Press twice to show the next parameter.
· Press twice to return the monitor to frequency monitor.
are displayed ... Why?
Operation panel (FR-DU07)
Display
PU indication is lit.
The parameter
number read
previously appears.
Flicker ··· Parameter setting complete!!
3
45