(2) Clearing procedure
POINT
· The faults history can be cleared by setting "1" in Er.CL Faults history clear.
1.
Screen at powering on
The monitor display appears.
2.
Press
to choose the parameter
setting mode.
3.
Turn
until
appears.
4.
Press
to read the present set value.
"
"(initial value) appears.
5.
Turn
to change
it to the setting value " ".
6.
Press
to set.
Operation
(faults history clear)
· Press
to read another parameter.
· Press
to show the setting again.
· Press
twice to show the next parameter.
Check and clear of the faults history
Display
The parameter
number previously
read appears.
Flicker ··· Faults history clear complete!!
5
117