Introduction; Day Trial; Section 2.0 60 Day Trial - NEC Univerge SV8100 User Manual

License manager server
Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

License Management Server
S
1.0
I
ECTION
NTRODUCTION
This manual is intended to give an overview on how the licensing procedure operates
on the SV8100 platform. Some features and hardware require an appropriate license
to be installed on a SV8100 processor to work. Each SV8100 CCPU has a unique
Hardware Key that is generated by NEC Infrontia. Software Key Codes can be
downloaded from the License Manager Server (LMS) and assigned to a hardware
key.
The LMS is a web portal where users can login and download a license that can be
installed on a CCPU. The procedure involves logging the hardware key on to the
LMS, and then assigning a software key to the hardware key. After this is done, a
license file can be downloaded and installed on a CCPU blade using PC Pro or a USB
Stick.
S
2.0
60 D
ECTION
The 60 day trial should only be used when it is not possible to install a real license
that would have been downloaded from the LMS. If the 60 day trial expires without a
real license being installed, the SV8100 operates using only unlicensed features. By
default the trial is turned Off and can be turned on or off only by using Telepro. Set
Program 90-55-01 to 1 to enable or 0 to disable the trial.
The 60 day trial gives full access to all PBX features for its duration. External
applications do not operate under the trial license, but some of the applications may
have their own trial license that can be used.
The trial rules for the trial are provided below:
___________________________________________________________________________________
User Guide
T
AY
RIAL
The 60 day demo starts when the system is powered on. The option to enable or disable
this feature is available in Data Program 90-55-01 (1=Enable and 0=Disable).
When the CCPU is powered down and left off, the timer stops, and starts counting
again when it is powered on.
To determine the number of days left for the trial, set Program 90-55-01 to 1 and check
Program 10-52-01.
1 - 1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents