NEC Univerge SV8100 User Manual page 24

Issue 1.0 License Manager Server
___________________________________________________________________________________
Select the Customer and Location in the upper part of the screen. Licenses
attached to the customer are displayed below.
If you need to detach any licenses from the customer, select the licenses on
the left hand side of the part number and click Detach. The licenses will be
detached from the customer and will be available to be assigned again.
To generate the license file, select the licenses that should be assigned to
the customer by checking the box to the left of the part number, then click
Register. After clicking the register button, you are prompted to click Yes to
continue.
ONCE A LICENSE HAS BEEN REGISTERED TO A CUSTOMER, THEN
THIS ACTION CAN NOT BE REVERSED. AFTER THE REGISTRATION
PROCEDURE HAS GONE THROUGH THEN THE LICENSE FILE IS
GENERATED AND IS AVAILABLE TO BE INSTALLED ONTO THE
SV8100. UNDER NO CIRCUMSTANCES WILL FREE LICENSES BE
ISSUED IF LICENSES ARE INCORRECTLY ASSIGNED.
___________________________________________________________________________________
1 - 16 User Guide