3Com 7700 Configuration Manual page 33

-v Verbose output. ICMP packets other than ECHO_RESPONSE that are
received are listed
STRING<1-20> IP address or hostname of a remote system
Ip IP Protocol
Enter a command with a
■
parameters, all the parameters and their brief descriptions will be listed.
[SW7700] garp timer leaveall ?
INTEGER<65-32765>
[SW7700] garp timer leaveall 300 ?
<cr>
<cr> indicates no parameter in this position. The next command line repeats
the command, you can press Enter to execute it directly.
Enter a character string with a
■
character string.
<SW7700>p?
ping
Input a command with a character string and
■
beginning with this character string in the command.
<SW7700> display ver?
version
Common Command Line Error Messages
All the commands that are entered by users can be correctly executed if they have
passed the grammar check. Otherwise, error messages are reported to users. The
common error messages are listed in Table 19.
Table 19 Common Command Line Error Messages
Error messages
Unrecognized command
Incomplete command
Too many parameters
Ambiguous command
History Command
The command line interface provides a function similar to DosKey. The commands
entered by users can be automatically saved by the command line interface and
you can invoke and execute them at any time. By default, he history command
buffer can store 10 history commands for each user. The operations are shown in
Table 20.
Table 20 Retrieve History Command
Operation Key
Display history display history-command
command
, separated by a space. If this position is for
?
Value of timer in centiseconds
(LeaveAllTime > (LeaveTime [On all ports]))
Time must be multiple of 5 centiseconds
, and list all the commands beginning with this
?
Causes
Cannot find the command.
Cannot find the keyword.
Wrong parameter type.
The value of the parameter exceeds the range.
The command is incomplete.
You entered too many parameters.
The parameters you entered are not specificf.
Command Line Interface
, and list all the key words
?
Result
Displays history commands by the
user who is entering them.
25