Feature And Functions Of The Command Line - 3Com 7700 Configuration Manual

24 C 1: S
HAPTER YSTEM
Feature and Functions of
the Command Line
A
CCESS
Table 18 Function Feature of Command View
Command
view Function
Layer-2 ACL Define the rule of
view layer-2 ACL
RADIUS Configure radius
server group parameters
view
ISP domain Configure ISP
view domain
parameters
Online Help
The command line interface provides full and partial online Help modes.
You can get the help information through these online help commands, which are
described as follows.
Enter in any view to get all the commands in it and corresponding
■ ?
descriptions.
<SW7700> ?
User view commands:
language-mode Specify the language environment
ping Ping function
quit Exit from current command view
super Enter the command workspace with specified user priority
level
telnetEstablish one TELNET connection
tracertTrace route function
Enter a command with a
■
keywords, then all the keywords and the corresponding brief descriptions will
be listed.
<SW7700> ping ?
-a Select source IP address
-c Specify the number of echo requests to send
-d Specify the SO_DEBUG option on the socket being used
-h Specify TTL value for echo requests to be sent
-I Select the interface sending packets
-n Numeric output only. No attempt will be made to lookup host
addresses for symbolic names
-p No more than 8 "pad" hexadecimal characters to fill out the sent
packet. For example, -p f2 will fill the sent packet with f and 2
repeatedly
-q Quiet output. Nothing is displayed except the summary lines at
startup time and when finished
-r Record route. Includes the RECORD_ROUTE option in the ECHO_REQUEST
packet and displays the route
-s Specifies the number of data bytes to be sent
-t Timeout in milliseconds to wait for each reply
Command to
Prompt enter
Key in acl
[SW7700-acl-
number 200 in
link-200]
System view
Key in radius
[SW7700-radius-
scheme 1 in
1]
System view
Key in domain
[SW7700-isp-163
isp-163.net in
.net]
System view
, separated by a space. If this position is for
?
Command to
exit
quit returns to
System view
return returns
to user view
quit returns to
System view
return returns
to user view
quit returns to
System view
return returns
to user view