Pin Assignment Chart - Sartorius FB Operating Instructions Manual

Pin Assignment Chart

(For devices with 12-pin round
female connector)
Female Interface Connector:
12-contact, with screw lock
hardware for cable gland
Male Connector Required:
Type C091D, 12-pin
Round male connector with screw
lock hardware for cable gland,
Amphenol (IP65) Sartorius order no.:
69QC0010
Pin Assignment Chart:
12-pin round 25-pin
connector adapter
A 18
B 2
C 3
D 20
E 7, 8, 14
F 13, 25, 12 +5 V output
G 16
H 5
J 17
K 15
L 19
M 11
Connect shield to connector housing so that the electrical resistance
is almost zero
* Only with a special data interface – see "Accessories"
** For this function, refer to "Universal Switch for Remote Control"
in the section entitled "Additional Functions"
Operating the Scale
RS-232 signal RS-485* signal
(SBI and xBPI) (xBPI)
Control output "heavier" Control output "heavier"
Data output (RxD) RxD – TxD – N
Data input (RxD) RxD – TxD – P
Data Terminal Ready (DTR)
Signal GND Signal GND
+5 V output
Control output "lighter" Control output "lighter"
Clear to Send (CTS)
Control output "equal" Control output "equal"
Universal remote- Universal remote-
control switch** control switch**
Control output "set" Control output "set"
+12 V output +12 V output
69