Practical Example
Select the Counting Application Program
Step
1. Select Setup menu
2. Select Scale Functions
group code (Menu)
3. Select the Application
Prog. group
4. Confirm Application Program
(2nd menu level)
5. Confirm App. Selection
(3rd menu level shows current
setting; in this case: weighing)
6. Select the Counting program
7. Confirm selection
of Counting program
8. Set other parameters, if desired
9. Save settings and exit menu
Key (or instruction)
M
Menu soft key
w/[TOGGLE]
Y
X
X
Y Y
X
x y Y X
M
Configuring the Scale
Display/Output
info--menu--input
17