ASSEMBLY INSTRUCTIONS
Remove the treadmill from the carton and place it on a solid, level surface.
NOTE: It is recommended that you always use the aid of a second person when
removing the treadmill from the carton.
Pull both Right/Left Handlebar Support Tubes (32R, 32L) all the way up, then attach both
M8x16 Knobs (18) onto the Right/Left Handlebar Support Tubes(32R, 32L) and Base
Frame (14).
Pull the Handlebar (5) all the way up, then attach both M8x16 Knobs (18) onto the
Handlebar (5) and Right/Left Handlebar Support Tubes (32R, 32L).
Place the Safety Tether Key (11) onto the Computer (16).
16
11
32L
7
5
18
32R
18
18
14