Assembly Instructions - LifeGear 98105 Owner's Manual

ASSEMBLY INSTRUCTIONS

Step 1
It is recommended to have a second person assist with this step. One person should hold
the Right Handlebar Support Tube (16) in place while the other person inserts the wire.
Insert the Extension Sensor Wire B (78) from the Base Frame (19) into the hole in the
Right Handlebar Support Tube (16) and then pull it out from the top end of the Right
Handlebar Support Tube (16).
Step 2
Attach the Right Handlebar Support Tube (16) to the Base Frame (19) with four Washers
(14 )and four Hexagon Socket Oval Head Bolts (18). Semi-tighten bolts with the Allen
Wrench with Phillips Screwdriver provided.
NOTE: DO NOT FULLY TIGHTEN BOLTS IN STEP 2 UNTIL THE STEP 6 IS
COMPLETE.
78
78
78
19
16
16
19
14
18
14
19
18
9
16
Hardware:
16
(14) Washer
4 PCS
(18) Hexagon Socket
Oval Head Bolt
4 PCS