Connector 'J6 | Com1' (Remote Communications And Discrete Control Port); Table 2-8. Lpod 'J6 | Com1' Pin Assignments - Comtech EF Data LPOD Installation And Operation Manual

LPOD Outdoor Amplifier / Block Up Converter
System Connections, Installation and Startup
2.2.5 Connector 'J 6 | COM1' (R emote Communications and Dis crete Control Port)
PS 1/PS 1.5
Pin
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
PS 2

Table 2-8. LPOD 'J6 | COM1' Pin Assignments

Name
RS485_+RX
RS485_-RX
RS485_+TX
RS485_-TX
RS232_RD
Ethernet TX+
RS232_TD
Ethernet TX-
TX/RX Switch Drive 1 Pos
Gnd
SUMFLT In
SUMFLT Out
TX Switch Pos 1 Ind
RX Switch Pos 1 Ind
+24V
System Mute Control
Switch Common
Ethernet RX-
Ethernet RX+
The 'J6 | COM 1' discrete control connector is
the primary
monitoring the LPOD. It is a 19-pin circular
connector, type MS3112E14-19S. The pinout
specification is contained in Table 2-8.
Mating connector: ITT: KPT06J14-19P or
MS3116J14-19P.
Description
Pin 3 of DB9 female connector
Pin 3 of RJ45 female connector
Pin 2 of DB9 female connector
Pin 6 of RJ45 female connector
Not for customer use
Ground (also Pin 5 of DB-9F connector)
Open when faulted, else +5VDC
When faulted, tied to Pin K, else open
Online/Offline indication
Not for customer use
Not for customer use
System muted if customer ties to Pin K
GND reference for Pin N
Pin 2 of RJ45 female connector
Pin 1 of RJ45 female connector
2–7
Revision 9
MN-LPOD
input for controlling and