F.
Parts name setting
Enter the new parts name from the keys on the
screen.
There are three screen in the input screen and
are changed with the arrow key:
• Alphabet (a capital letter), numeric number
• Alphabet (a small letter), numeric number
• Symbol, numeric number
The key arrangement can be changed by press-
ing the [Keyboard] key in the alphanumeric
(uppercase letter/lowercase letter), symbol and
data input screen.
(1) Procedure
1. Enter the 25 Mode.
2. "25 mode menu screen"
Press the [4. Parts counter ] key.
3. "Parts counter menu screen"
Press the [2. Count of parts (Named)] key.
4. "Copy count screen by parts to be replaced
(named)"
Press the arrow key to select the data to be set
or changed.
5. Press the [P/N SET] key.
6. "Parts name setting screen by parts to be
replaced (named)"
Enter new parts name using the keys on the
screen.
7. Press the [OK] key to enter the parts name that
has been entered and return to the copy count
screen by parts to be replaced (Named).
Note:
• When pressing the [CANCEL] key without press-
ing the [OK] key, the setting is completed without
setting a parts name and returns to the copy
count screen by parts to be replaced (Named).
7.6
Password Setting
The following passwords are set.
• Key operator password (8-digits): Password to
enter
key
operator
enhancement is enabled.
• User account (EKC) master key code (8 digits):
An EKC master key code that is required when
entering various EKC setting modes.
• Weekly timer password (4 digits): A weekly timer
password that is required when entering various
weekly timer setting modes.
• CE password (8-digits): Password for CE to
access service modes when security enhance-
ment is enabled.
A. Procedure
1. Enter the 25 Mode.
2. Press the [5. Password setting] key.
3. "Password setting menu screen"
Press the key of an item that you want to set.
• [Key Operator Password (8 digits)]
• [User account (EKC) master key code (8 digits)]
• [Weekly timer Password (4 digits)]
• [CE Password (8 digits)]
4. Input a new password through the numeric keys
and press the [SET] key to update the pass-
word.
When the following keys are set for the pass-
word, each mode can be used without a pass-
word.
• "0000" : Weekly timer Password
• "00000000": User account (EKC) master key
code
5. Repeat the procedures 3 and 4 to set pass-
words for other items.
6. Press the [RETURN] key to return to the pass-
word setting menu screen.
Note:
• When pressing the [RETURN] key without press-
ing the [SET] key, the setting is complete. How-
ever the new password will not be entered and
the password setting menu screen will return.
• Do not use name, your birthday or employee
code number as the password since other people
can easily guess them.
1-41
25 MODE
mode
when
security
3