Copy Paper; Machine Data; Maintenance; Consumables - Konica Minolta 7145 Service Manual

Number of originals to be stored:More than 140 sheets under the following conditions:
C. Copy Paper
Plain paper:
Special paper *1
*1 With bypass feed method, paper should be fed one sheet at a time. Double sided copy not allowed.
*2 Only bypass feed.
D. Machine Data
Power source:
Power consumption:
Weight:
Dimensions:
E. Maintenance

Maintenance:

F. Consumables
Developer:
Toner:
Drum:
Original:
Density:
Mode:
Memory capacity:
Job:
2
60g/m or 17lbs to 105g/m
Label paper, OHP film, blueprint-master paper, 50g/m
or 16lbs high-quality paper (thin), 106g/m
high-quality paper (thick1), 131g/m
quality paper (thick2 *2)
230VAC –14% to 10.6% 50Hz/60Hz
120VAC –14% to 6% 60Hz
Maximum 1500W or less (fully optional)
Approximately 183lbs (with DF provided)
7145: 23.2in (W) x 23.4in (D) x 42.6in (H) (with DF + DB)
7235/7228/7222: 23.4in (W) x 25.8in (D) x 44.6in (H) (with DF + DB)
Once every 120,000 copies (7145)
Once every 100,000 copies (7235/7228/7222)
Exclusively for 7145
Exclusively for 7235/7228/7222
Exclusively for 7145
Exclusively for 7235 (Common to 7135)
Exclusively for 7228/7222 (Common to 7022/7120/7130)
Exclusively for 7145 (φ 60)
Exclusively for 7235/7228/7222 (φ 60)
1-5
PRODUCT SPECIFICATIONS
Konica standard chart
Manual 5
Character/photograph
64MB (provided only as standard)
Job in mode with page memory not used
2
or 28lbs, high-quality paper
2
or 28lbs to 130g/m
2
or 35lbs to 160g/m
2 2
or 13lbs to 59g/m
2
or 35lbs
2
or 43lbs high-
2