4.2.5 Action Type - Phone Call
- The system will call a given phone number when an unusual event is
detected.
Step 1:
Select the "Phone Call"
action and then click OK.
Step 2:
The responding window will
popup to Select Contactor (You can
choose only one contact at once).
Click the "Phone Call" indicator to
modify the setting.
Edit Address Book:
The panel is the same as the one in "Send E-mail" action.
Note:
To setup the phone number and make an audio record for the
phone call, go to Config > Setup > Hotline. See Configuration at page 102
for detail.
4.2.6 Action Type - PTZ Preset Go
- The PTZ (pan/tilt/zoom) camera will go to a preset point or auto
patrol when an unusual event is detected.
Step 1:
Select the "PTZ Preset Go"
action and then click OK.
Step 2:
The responding window will
popup to PTZ Camera Preset Go.
Click the "PTZ Preset Go" indicator to
modify the setting.
Step 3:
Set the action of cameras
which you want to trigger by events.
For example:
Please follow below
steps to setup this function.
Set the action of camera 1:
1. Choose camera 1.
2. Set the start, end preset points.
You can insert the contact information at this panel.
1.
2.
3.
2.
IP CamSecure
4. Guard