Table of Contents
Advertisement
Install IP camera(s)
Step 1:
Setup the IP camera(s) by referring to the user manual provided by
the IP camera manufacturer.
Step 2:
Make sure you can access this camera through IE browser.
Step 3:
Add the IP camera(s) to the system by following steps.
Add IP camera(s)
Step 1:
Go to Start > All Programs > LevelOne >
IP CamSecure > Main Console.
Step 2:
Type in user name and password and
log in to the system.
Step 3:
In Main Console, go to Config > Setting
to obtain the Setting panel.
Step 4:
Go to Camera tab.
Note:
If your IP cameras support UPnP, follow
step 5. Otherwise, follow step 8.
Step 5:
Click on "Search" to find out the IP
cameras at this local area network
(LAN).
Note:
Search function only available when
the IP cameras support UPnP.
Step 6:
Select one of the IP cameras that are
available; check this camera and
enter the username and password.
Step 7:
Click OK to add the camera.
Step 8:
Click "Insert" to insert the IP cameras.
IP CamSecure
Quick Start
Step 4
Step 5 Step 8
Step 3
Step 12
Advertisement
Table of Contents
