Table of Contents
Advertisement
Options:
Adjust the setting only when the server is stopped.
Port:
Assign a port for the clients to connect to your system via
Remote playback server. Default port is 5160.
Maximum Users:
to the system. Default is 8 users and maximum is 64.
Note:
One user counts as one account that is logging in to the server.
Use Default Web Server:
clients will be able to watch live video via Internet Explorer. The port
for live streaming server is set to 80 by default.
Note:
Must check this item for system access via IE*.
Save Log:
Save the log information at appointed folder.
Black / White List
White List:
Check the "Enable White List" box to activate the white list
filter. Only IP from the white list is allowed to log in.
Black List:
Check the "Enable Black List" box to activate the black list
filter. IP from the black list will be blocked.
IP Address:
Enter an IP address into the IP address field on the left. To
add an IP address range to the system, enter 2 sets of IP address to
indicate a series of IP(s).
Add/Delete:
Add the IP(s) onto the list or remove it from the list.
Apply to All Network Servers:
Number of connections that are allowed to connect
Activate the Web server by checking the box;
Apply the settings to both live streaming
IP CamSecure
5. Configuration
Enable list
IP address
Black/
White list
Apply to all
Advertisement
Table of Contents
