Table of Contents
Advertisement
2. PlayBack
2.6.3 Unusual Event-Missing Object
Missing Object:
object is removed from the defined area on the
screen.
Define detection zone:
object, it is required to define a detection zone.
Left click and drag to draw a detection zone.
Alarm will be triggered when the defined object
is removed from the detection zone.
Sensitivity:
Modify the sensitivity setting by changing the slider control.
Move toward right will increase the sensitivity level and a relatively
small movement will trigger the alarm; in contrast, move the slider
control toward left will reduce the sensitivity for movement detection.
Interval:
Click and move the slider control to the right to increase time
interval so that the alarm will only be triggered when the movement
lasts longer. Move to the left to reduce the time interval.
*IP CamSecure Lite32 only has General Motion option in Search Mode.
.
2.6.4 Unusual Event- Focus Lost / Camera Occlusion
Focus Lost:
System will inform you when the camera(s) lose its focus.
Camera Occlusion:
2.7 Enhancement
2.7.1 General Setting
Check the option and chose whether you want to apply
the setting to all the channels or only to those currently
shown on the screen.
2.7.2 Filter Setting
Visibility:
Check the option and adjust the gamma
value of the image to enhance the image and
make it cleaner.
page-47
Alarm is set off when the selected
Before detecting missing
Alarms when any of the cameras is blocked.
IP CamSecure
Advertisement
Table of Contents
