Advertisement
Quick Links
Setting up Level One IP Camera (Model FCS-
0040/WCS-0040/FCS-0010/WCS-0010)
1. Login to `192.168.0.99' (default Level One IP Camera Address)
a. Username: administrator (default)
b. Password: (blank)
2. After login, click `Administration'.
If you face any problem during setting up your camera, please do not hesitate to email us at support@epicamera.com.
Our technical support will get back to you as soon as we can. Thanks.
Advertisement
Related Manuals for LevelOne FCS-0040
Summary of Contents for LevelOne FCS-0040
- Page 1 Setting up Level One IP Camera (Model FCS- 0040/WCS-0040/FCS-0010/WCS-0010) 1. Login to `192.168.0.99’ (default Level One IP Camera Address) a. Username: administrator (default) b. Password: (blank) 2. After login, click `Administration’. If you face any problem during setting up your camera, please do not hesitate to email us at support@epicamera.com. Our technical support will get back to you as soon as we can.
- Page 2 For Network Setup 1. Click `Network’ and from Internet Connection Type, choose `Static IP Address’. 2. Fill in the box. a. IP Address: 192.168.0.99 (IP Camera Address). b. Subnet Mask: 255.255.255.0 (default). c. Gateway: (your modem IP Address). d. DNS: (For streamyx user, 202.188.0.133, 202.188.1.5). e.
- Page 3 For FTP Setup 1. Under Setup Page, Click `FTP’. 2. Fill in the box. a. FTP Server IP: www.epicamera.com. b. Account: (FTP Login ID). c. Password: (FTP Password). d. Directory: (/Camera No. /) via “/Cam1/” or “/Cam2/” or “Cam3/”. e. Click `Save’ to save your setting. If you face any problem during setting up your camera, please do not hesitate to email us at support@epicamera.com.
- Page 4 To Turn on FTP service 1. Under Event, Click `Event Trigger’. 2. Trigger Event option, choose `Sequential snapshot’ and choose snapshot interval timer. Choose send snapshot by `FTP’ and Click `Save’. *Note: FCS-0010/WCS-0010 does not support `Sequential snapshot’ function. If you face any problem during setting up your camera, please do not hesitate to email us at support@epicamera.com. Our technical support will get back to you as soon as we can.
-
Page 5: Configure Motion Detection
Configure Motion detection 1. Under Event, Click `Motion Detection’. `Choose `Window 1’ and click `Save’. If you face any problem during setting up your camera, please do not hesitate to email us at support@epicamera.com. Our technical support will get back to you as soon as we can. Thanks. - Page 6 2. From `Event Trigger’ and Trigger Event option, choose `Detection’ and choose `Motion Detection’. Choose send snapshot by `FTP’ and Attachment Type `JPEG Image’. Click `Save’. If you face any problem during setting up your camera, please do not hesitate to email us at support@epicamera.com. Our technical support will get back to you as soon as we can.