Appendix B - Pda / Smart Phone Client; Install Pda / Smart Phone Client; Execute Pda / Smart Phone Client; Main Console Setting - LevelOne IP CamSecure User Manual

IP CamSecure
Appendix B – PDA / Smart
PDA / SP (Smart Phone) Client are only applied for devices with Windows
Mobile 5.0 platform or above. See the sections below to find how to install
and execute PDA / SP Client.
Note:
1. The different between Smart Phone and PDA Client is navigation of
operation, user can only control client with phone buttons.
2. The resolution of PDA / SP Client is limited in 240*320 (QVGA).

1.1 Install PDA / Smart Phone Client

Step1: Connect mobile device to the PC.
Step 2: Insert the installation CD and click on PDA Client Installation /
Smart Phone Client Installation to install application in device.
Note: If you do not have Microsoft® ActiveSync installed, a
message will appear "Can not find ActiveSync. Please reinstall
ActiveSync and than run this installation again."
Step 3: Check the client application is installed completely in the mobile
device.

1.2 Execute PDA / Smart Phone Client

1.2.1 Main Console setting

Step 1: Go to "Config" and select
"Network Service"
Phone Client
Network Service
Appendix B
page-190