Table of Contents
Advertisement
IP CamSecure
5. Configuration
Kill Client:
Highlight an IP address and click on the "Kill Client" button
to block the client from your client list.
Kill All Clients:
logging to your system.
Service:
Server Status:
Options:
Adjust the setting only when the server is stopped.
Port:
Assign a port for the clients to connect to your system via
Remote Live Viewer. Default port is 5150.
Maximum Connections:
connect to the system. Default is 16 channels and maximum is 128,
one camera video counts as one connection.
Use Default Web Server:
clients will be able to watch live video via Internet Explorer. The port
for live streaming server is set to 80 by default.
Must check this item for system access via IE*.
Note:
Save Log:
Save the log information at appointed folder.
Enable Audio:
along with video stream.
Black / White List
Click on this button, and then block all the clients
Click on Start/Stop to turn on/off this option.
Number of connections that are allowed to
Activate the Web server by checking the box;
Select this option to enable the audio transmission
Enable list
IP address
Black/
White list
Apply to all
Advertisement
Table of Contents
