IP CamSecure
There are 2 modes in E-Map application:
Edit mode: Allow users to add/edit maps and indicators of devices. In
Edit mode, the function buttons on the bottom of the window will be
active, and then setup the configuration before running E-map function
at the first time.
Operate mode: all settings will be activated in this mode.
6.1 Edit Mode
To carry out edit function, you need to be in Edit Mode.
Function button
6.1.1 Add/Edit/Delete Map
Add E-Map:
Step 1:
Make sure being in "Edit Mode" and all devices are connected
and inserted.
Step 2:
Right click on the "Map
the option menu to add map, or just click "Add Map" button to obtain
the "Map Config" dialog.
Edit mode/ Operate mode
Switch button
" icon in device and map list to obtain
6. E-Map
page-126