LevelOne CamCon FCS-1060 User Manual
  1. Manuals
  2. Brands
  3. LevelOne Manuals
  4. Software
  5. CamCon FCS-1060
  6. User manual
LevelOne CamCon FCS-1060 User Manual

LevelOne CamCon FCS-1060 User Manual

Levelone camcon fcs-1060: user guide
Hide thumbs Also See for CamCon FCS-1060:
Table of Contents

Advertisement

Quick Links

IP CamSecure
User's Manual
Ver. 1.8-0810
Copyright (c) 2008 Digital Data Communications Co., Ltd. All Rights Reserved.
All features and functions are subject to change without notice. Please visit www.level1.com for the
latest ones.

Advertisement

Table of Contents
loading

Related Manuals for LevelOne CamCon FCS-1060

Summary of Contents for LevelOne CamCon FCS-1060

  • Page 1 IP CamSecure User’s Manual Ver. 1.8-0810 Copyright (c) 2008 Digital Data Communications Co., Ltd. All Rights Reserved. All features and functions are subject to change without notice. Please visit www.level1.com for the latest ones.

  • Page 3: Table Of Contents

    INSTALLATION...3 INIMUM YSTEM EQUIREMENT )...4 NSTALL CAMERA ) ...4 NSTALL CAPTURE CARD IP C ECURE NSTALLATION MAIN CONSOLE ... 11 PLAYBACK...17 ...20 O WITHDRAW THE RECORD ...22 EARCH ...28 NHANCEMENT ...29 IDEO MAGE ...30 RINT ACKUP ...31 IEWER SCHEDULE...35 ...38 NCODING PTIONS ANEL...

  • Page 4: Installation

    IP CamSecure Installation Installation Minimum System Requirement Parameter definition: For IP network camera M: parameter of resolution of camera. 1 Mega-pixel : M=10VGA or D1 resolution : M=5CIF resolution : M=1 N: FPS of Camera For analog camera (FCS-8004 capture card) P = 60 S=M*N+P For example: 16 channel system a) 1 camera at 1 Mega-pixel resolution with 10FPS b) 2 cameras at D1 resolution with 15FPS c) 5 cameras at CIF resolution with 30FPS d) 8 cameras with 2pcs FCS-8004...

  • Page 5: Nstall Ip Camera )

    IP CamSecure Installation Install IP camera(s) Step 1: Set up the IP camera referring to the quick installation guide provided. Step 2: Check the network between the IP camera and the system. Step 3: Add the IP camera to the system. See details on later pages. Install capture card(s) Step1: Insert the card onto an empty PCI slot.

  • Page 6: Ip Cam Secure Installation

    IP CamSecure Installation IP CamSecure Installation Step 1: Insert the Installation CD. Step 2: The setup page should be loaded automatically. If it does not, please select your CD-ROM drive manually to open the setup page. Click “IP CamSecure” to initiate the installation. Step 3: Select the language for installation from the choices below.
  • Page 7 IP CamSecure Installation Step 4: Click “Next” Step 5: Check the option “I accept the terms of the license agreement”.
  • Page 8 IP CamSecure Installation Step 6: Please enter your name and the company name for which you work. Step 7: Install all program features into the default directory. Check the option “Complete”. : [This is recommended for advanced users.] Install the system to a preferred directory. Or select whichever feature(s) you wish to install. Check the option “Custom”.
  • Page 9 IP CamSecure Installation Select folder where setup will install files. Select the features setup will install. Hint: For example, select only Playback and LiveView for installation. Install and use only these features on multiple remote sites at home or anywhere with a PC.
  • Page 10 IP CamSecure Installation Step 8: Press the “install” to start the installation.
  • Page 11 Step 9: Press “Finish” to finish the installation. Step 10: Execute the Main Console **IP CamSecure Lite32 is free bundled with LevelOne IP camera and Capture Card. ** IP CamSecure professional version is available upon purchase. While using IP CamSecure Pro/Pro Plus/Pro Mega ,please plug the included USB dongle into USB port as a...

  • Page 12: Main Console

    IP CamSecure Playback Main Console The main operation system. To activate schedule recording, setup smart guard and configure system setting.
  • Page 13 IP CamSecure Playback Exit Minimize Exit: Shut down the main console or log out current user. Minimize: Minimize the Main Console. Screen Division: Allocate the sub-screen displays of cameras by clicking on the icon of desired layout. Quick switch to single camera display by double click the particular sub-screen. Double click the single camera display again to regain previous screen division layout.
  • Page 14 IP CamSecure Playback Start : Click on the Start icon and select from the drop down menu to activate/ deactivate: (a) Recording Schedule System, (b) Smart Guard System, or (c) Counting Application. Select Start/Stop Monitor All to activate/ deactivate all the functions at once. You may also enable secondary display, open event report, and lock the system here.
  • Page 15 IP CamSecure Playback Playback Schedule Playback: Click the icon to get Playback Console. You can watch recorded video, search, adjust image from records data, save video pictures and print images, check log in information, event records and setup recording function configuration. See Playback in detail on later pages. Schedule: Schedule recording time table and setup recorder configuration.
  • Page 16 IP CamSecure Playback Click on the Focus icon and select auto focus if you want the system to decide the focus point for you. Patrol: Go to Patrol > Set Patrol to obtain the Patrol Setup dialog. From the left window, select the cameras that you would like to have in the patrol group.
  • Page 17 IP CamSecure Playback On Screen Menu: Right click on the camera screen and get the On Screen Menu, from which you can enable move, enable digital PTZ, and connect/ disconnect the camera. Enable Move: With cameras that support PT function, by selecting the enable move function, you may adjust the camera’s view by clicking on the display screen.

  • Page 18: Playback

    IP CamSecure Playback Playback Watch the recorded video, view and/or search for unusual events and recorded system information. *There is only 1 channel displayed in Playback in IP CamSecure Lite32 while there are up to 16 channels displayed in IP CamSecure Pro/Pro Plus/Pro Mega simultaneously.
  • Page 19 IP CamSecure Playback Scroll Bar Exit Minimize Control Zoom Speed Minimize: Minimizes the playback Console window. Exit: Turn off the Playback Console. Scroll Bar: Indicate the status of the playing video; drag it to where you want to review. Control: Play, pause and stop the video. Cue: When playing video, click on the Cue In/ Cue Out icon at where you want to set as the starting/ ending point of a saved video clip or a backup file.
  • Page 20 IP CamSecure Playback Step FWD/REV: Forward/reverse frame by frame. Browse Mode: Play the recorded video. Search Mode: Click on the Search Mode icon and get the Intelligent Search Tool panel. You can setup unusual events here to detect abnormality that occurred during the video was recorded. To setup unusual events, see this in detail on later pages.

  • Page 21: To Withdraw The Record

    IP CamSecure Playback Day-Time Panel Record Display Window: The record display window shows the information of the available video clips. It may show in calendar or list control view. To know how to modify the record display window view. Click on the icon on the top of the display window to obtain the Remote Playback Site Management dialog.
  • Page 22 IP CamSecure Playback Step 2: Use color bars to differentiate event types from each other. This will help you select video clips. Step 3: Highlight the video clip you want to review by left-clicking and dragging the time period. You may also utilize the Start Time and End Time in Date Time Period Section.

  • Page 23: Search Mode

    IP CamSecure Playback Search Mode Unusual Event - General Motion Intelligent Search Tool panel: Click on the Search Mode icon and get the Intelligent Search Tool panel. You can setup unusual events here to detect abnormality that occurred during the video was recorded. There are 5 types of unusual events: General Motion Foreign Object...
  • Page 24 IP CamSecure Playback Unusual Event - General Motion Sensitivity: Click and move the control bar to the right to increase sensitivity, that is, a relatively small movement will trigger the alarm. Move to the left to reduce the sensitivity of movement detection.
  • Page 25 IP CamSecure Playback Unusual Event - Foreign Object Intelligent Search Tool panel: Click on the Search Mode icon and get the Intelligent Search Tool panel. You can setup unusual events here to detect abnormality that occurred during the video was recorded. Foreign Object: Alarm is set off when an object appears in the defined area on the screen.
  • Page 26 IP CamSecure Playback Unusual Event - Foreign Object Sensitivity: Click and move the control bar to the right to increase sensitivity, that is, a relatively small movement will trigger the alarm. Move to the left to reduce the sensitivity of movement detection.
  • Page 27 IP CamSecure Playback Unusual Event - Missing Object Intelligent Search Tool panel: Click on the Search Mode icon and get the Intelligent Search Tool panel. You can setup unusual events here to detect abnormality that occurred during the video was recorded. Missing Object: Alarm is set off when the defined object is removed from the defined area on the screen.
  • Page 28 IP CamSecure Playback Unusual Event - Missing Object / Lose Focus / Camera Occlusion Sensitivity: Click and move the control bar to the right to increase sensitivity, that is, a relatively small movement will trigger the alarm. Move to the left to reduce the sensitivity of movement detection.

  • Page 29: Enhancement

    IP CamSecure Playback Enhancement General Setting: Check the circle and chose whether you want to apply the setting to all the channels or only to those currently show on the screen. Filter Setting Visibility: Check the box and adjust the gamma value of the image, which means, you may enhance the image and make it cleaner.

  • Page 30: Save Video / Save Image

    IP CamSecure Playback Save Video / Save Image Save Video Step 1: Choose the camera display you want to save as a video clip. Step 2: Set up the Cue In and Cue Out points, the cue in and cue out time will show up on the display.

  • Page 31: Print / Backup

    IP CamSecure Playback Print / Backup Print Print in original size: Select to have the image print in original size. Fit the page: Select to have the image fit the page. Align Image: Top, Center, or Bottom Print Content: Print the image from currently selected channel or all the channels shown on the screen.

  • Page 32: Log Viewer

    IP CamSecure Playback Log Viewer *IP CamSecure Lite32 only has System Log option in Log Viewer. Step 1 Step 2 Step 3 Unusual Event: You can check out the history of Unusual Event that had been detected by Smart Guard System. Step1: Choose the type of event you want to check or select “All”...
  • Page 33 IP CamSecure Playback Log Viewer Step 1 Step 2 System Log: Select Log Type form the drop-down menu. There are total 11 types of log types, including: 1. Console Startup, 2. Console Shutdown, 3. User Login, 4. User Logout, 5. Start Schedule, 6.
  • Page 34 IP CamSecure Playback Log Viewer - Counting Application Counting Application: You can see the results of Counting Application during the time period you set. Counting Application (Diagram): The Counting Application result data will show in a diagram.
  • Page 35 IP CamSecure Playback Setting Database Source: Select local machine if you wish to withdraw video record from the PC you are working with currently. Otherwise, select remote playback server to access a database via the Internet. See Config > Remote Playback Server in detail on later pages. Play: Play when open: Check the box and set the system to play the video clip every time when you withdraw it from the database.

  • Page 36: Schedule

    IP CamSecure Schedule Schedule Click on Schedule icon on Main Console and get the Schedule configuration panel to setup the time schedule for video recording.
  • Page 37 IP CamSecure Guard Load Camera / Channel Day Mode Day Mode Schedule the cameras on a daily basis, which means that the recorder will be on and off, at the same time every day, according to the same schedule you setup. To setup the time schedule for each camera, you may 1.
  • Page 38 IP CamSecure Guard Time Bar Option 2: Click the Configure icon or double click schedule information on the screen (highlighted in blue), to obtain the Encoding Options panel and change the setting as wished. Note: The time schedule setting is based on 15 minutes. Copy To Configure Schedule information...

  • Page 39: Encoding Options Panel

    IP CamSecure Guard Encoding Options Panel Always Record: Select this option to record the video at all time. Record on Event: Select this option to obtain the Select Event panel. From the Smart Guard/Digital Input list, check the box of the camera(s) that you want to trigger the recording action. Click OK to complete the setting.
  • Page 40 IP CamSecure Guard To insert a new schedule manually Step 1: Left-click and draw the length you want on time table. The scheduled time will show as a grey bar. Step 1 Step 2 Step 3 Step 4 Step 2: Click on the Insert icon and add a new schedule with the setting of Regular Mode, that is, to record video during the time period you set with 30 FPS, Normal video quality and Normal resolution.
  • Page 41 IP CamSecure Guard Week Mode Custom Default Holiday Week Mode: Schedule the cameras for each day of the week differently. Besides that, you may appoint extra holidays in Week Mode. Default: Follow the same process to setup the schedule for every day in a week. Holiday: You may appoint Holiday(s) on which the system will work as the setting of Sunday.

  • Page 42: Guard

    IP CamSecure Guard Guard *Guard is only in IP CamSecure Pro/Pro Plus/Pro Mega. Click on the Guard bottom on the Main Console and start Event and Action Configuration panel. You need to assign an event you want to detect and then set up an action with which the system will react when the assigned event is detected.

  • Page 43: Event

    IP CamSecure Guard Event Insert Event Step 1 There are three sources of events: Camera (video image), Digital input (device that connected to you PC) and System (condition of your hardware). You can assign multiple events by following the instruction below. Assign a Camera event Step 1: Choose a channel from cameras and click the Insert Event icon.
  • Page 44 IP CamSecure Guard Event - Signal Lost Basic Enable Event: Check the box to activate. Life Cycle Automatic cancel event when event disappears: the alarm/action will be off once the abnormality is fixed or ends. Manual cancel event or event last triggered: The alarm/action will continue until being cancel from the Main Console (Start>Open Event Report>Cancel All).
  • Page 45 IP CamSecure Guard Event - General Motion Detect any movement in the defined detection zone. Enable Event Life Cycle Activated Period Basic Setting Enable Event: Check the box to activate. Life Cycle Automatic cancel event when event disappears: the alarm/action will be off once the abnormality is fixed or ends.
  • Page 46 IP CamSecure Guard Event - General Motion Sensitivity Interval Region Definition Start Simulation Advanced setting Sensitivity: Click and move the control bar to the right to increase sensitivity, that is, a relatively small movement will trigger the alarm. Move to the left to reduce the sensitivity of movement detection.
  • Page 47 IP CamSecure Guard Event - Foreign Object Alarm will be set off when an object appears in the defined area on the screen. Enable Event Life Cycle Activated Period Basic Setting Enable Event: Check the box to activate. Life Cycle Automatic cancel event when event disappears: the alarm/action will be off once the abnormality is fixed or ends.
  • Page 48 IP CamSecure Guard Event - Foreign Object Sensitivity Interval Region Definition Define object size Start Simulation Advanced setting Sensitivity: Click and move the control bar to the right to increase sensitivity, that is, a relatively small movement will trigger the alarm. Move to the left to reduce the sensitivity of movement detection.
  • Page 49 IP CamSecure Guard Event - Foreign Object Hint: For example, if you want to prevent somebody leaving a briefcase in a hallway, you may put a briefcase in the hallway where the camera is aiming on. On the screen of the camera, draw an area fit the size of the briefcase and define it as the object size;...
  • Page 50 IP CamSecure Guard Event - Missing Object Alarm will be set off when an object disappears in the defined area on the screen. Enable Event Life Cycle Activated Period Basic Setting Enable Event: Check the box to activate. Life Cycle Automatic cancel event when event disappears: the alarm/action will be off once the abnormality is fixed or ends.
  • Page 51 IP CamSecure Guard Event - Missing Object Sensitivity Interval Region Definition Define object size Start Simulation Advanced setting Sensitivity: Click and move the control bar to the right to increase sensitivity, that is, a relatively small movement will trigger the alarm. Move to the left to reduce the sensitivity of movement detection.
  • Page 52 IP CamSecure Guard Event - Missing Object Hint: For example, if you want to prevent somebody remove the computer monitor on the desk; draw an area fit the size of the monitor on the screen. Start Simulation: Click Start Simulation bottom and test the function on the preview screen.
  • Page 53 IP CamSecure Guard Event - Lose Focus Alarms you when any of the camera is losing focus and has blur image. Enable Event Life Cycle Activated Period Basic Setting Enable Event: Check the box to activate. Life Cycle Automatic cancel event when event disappears: the alarm/action will be off once the abnormality is fixed or ends.
  • Page 54 IP CamSecure Guard Event - Lose Focus Sensitivity Interval Ignore Lighting Start Simulation Advanced setting Sensitivity: Click and move the control bar to the right to increase sensitivity, that is, a relatively small movement will trigger the alarm. Move to the left to reduce the sensitivity of movement detection.
  • Page 55 IP CamSecure Guard Event - Camera Occlusion Alarms you when any of the camera is blocked. Enable Event Life Cycle Activated Period Basic Setting Enable Event: Check the box to activate. Life Cycle Automatic cancel event when event disappears: the alarm/action will be off once the abnormality is fixed or ends.
  • Page 56 IP CamSecure Guard Event - Camera Occlusion Sensitivity Interval Ignore Lighting Start Simulation Advanced setting Sensitivity: Click and move the control bar to the right to increase sensitivity, that is, a relatively small movement will trigger the alarm. Move to the left to reduce the sensitivity of movement detection.
  • Page 57 IP CamSecure Guard Event - Digital Input Event Step 1 Step 2 Step 1: Click and highlight Digital Input on the event type list and click Inset Event icon. Step 2: Select the device that connected to your system, that is, the PC you are working. Basic Setting Enable Event: Check the box to activate.
  • Page 58 IP CamSecure Guard Event - System Event Step 1 Step 2 Step 1: Click and highlight System Event on the event type list and click Inset Event icon. Step 2: Select the Event Type (Disk Space Exhausted) and then click OK. Basic Setting: for Disk Space Exhausted Enable Event: Check the box to activate.

  • Page 59: Action

    IP CamSecure Guard Action Insert Action: To setup actions responding to an unusual event. Step 1 Step 2 Step 1: Choose an event and click the “Insert Action” icon. Step 2: There are 6 types of actions: On Screen Display, Play Sound, Send E-mail, Send SMS Message, PTZ Preset Go and Signal Digital Output.
  • Page 60 IP CamSecure Guard Action - Action Type On Screen display: A red warning will be flashing on the screen of Main Console, indicating which type of unusual event is detected. Play Sound: Sound alarm warning. Choose a Wave file (.wav) and the system will play the sound as alarm when an unusual event is detected.

  • Page 61: Configuration

    IP CamSecure Remote Live Viewer Configuration Config Modify the setting and access counting application, log viewer, backup, and network services. Click on the Config icon, select from the drop-down menu and open the Configuration panel.
  • Page 62 IP CamSecure Config Setting – General Startup Panel Resolution DDNS Service Automatically Popup Event Report Startup: Check the box and activate the functions as the system starts. You may start/stop the function in Monitor panel on the Main Console. Panel Resolution: Set up the resolution of the control panel. You may select Auto Fit to have the system choose the best one for you.
  • Page 63 IP CamSecure Config Setting – General Storage Location: Assign the path and folder in which the system saves the files. Automatic Recycle: The system will automatically delete the oldest file when the storage space is low. Automatic Recycle: The system will automatically delete out-dated data and save storage space. Keep Video: Deletes the video records older than the number of days set.
  • Page 64 IP CamSecure Config Setting – General Audio Preview: Assign the audio channel to preview and the sound volume. Status Display: Select which information you want to show on the information-display on Main Console. Status Display Audio Preview...
  • Page 65 IP CamSecure Config Auto Reboot Check the option of “ Enable Auto Reboot ” that you can reboot the system on the time you select. Step 1: Check the option of “ Enable Auto Reboot. ” Step 2: Select the time you want to reboot.
  • Page 66 IP CamSecure Config Setting - Camera Camera List Camera Name Goto Web Interface Camera Settings Video Parameter OSD Setting Camera List: The camera(s) connected to the system will show on the panel, click the name of the camera to adjust the setting. Camera Name: Name the camera for your convenience.
  • Page 67 IP CamSecure Config Setting - IP Camera Search Delete Insert Config Search: Click on the Search icon to obtain the Search IP Camera panel. The system will start scanning automatically once the panel is opened; feel free to stop scanning by clicking on the Stop Scan button.
  • Page 68 IP CamSecure Config Setting - IP Camera IP/Video Server Setting panel Network Device Description Network: Fill up the Network field (including Name, IP Address, Http Port, User Name, Password and Protocol) referring to the instruction provided by the manufacturer. Check “Use DNS” to use domain name instead of IP address.
  • Page 69 IP CamSecure Config Setting – IP Camera Camera List Camera Name Goto Web Interface Camera Settings Video Parameter OSD Setting Camera List: The camera(s) connected to the system will show on the panel, click the name of the camera to adjust the setting. Camera Name: Name the camera for your convenience.
  • Page 70 IP CamSecure Config Setting - I/O Device Module Setting List of devices Input Monitor Module Setting: Name the module device and ID that has been connecting the digital input/output device(s) to your system. Device: This column displays the device(s) already installed to the system. ID: Select the number of the I/O port to which you plug the ribbon cable.
  • Page 71 IP CamSecure Config Setting - PTZ Config Basic Setting Advanced Setting Install the PTZ camera following the instruction of the manufacturer. The PTZ camera is usually connected to the PC with RS-485/RS-422. Check the box on the camera list to activate the PTZ control function of a PTZ camera. Basic Setting: Select the camera model, com port, baud rate, and address according to your PTZ camera.
  • Page 72 IP CamSecure Config Setting – Hotline *Hotline is only in IP CamSecure Pro/Pro Plus/Pro Mega. Configure the settings of hotlines, including E-mail and telephone calls, once an unusual event is detected. E-mail: Input the following information: server, sender’s E-mail address, E-mail’s subject title, and body content.
  • Page 73 IP CamSecure Config Setting - User Account User Account: The administrator may manage the user accounts here. From the list on the right, highlight each account and modify the privilege setting.
  • Page 74 IP CamSecure Config Setting - Address Book *Address Book is only in IP CamSecure Pro/Pro Plus/Pro Mega. Address Book: Manage the address book from which you want to give a call or E-mail when an unusual event is detected.

  • Page 75: Monitor Display

    IP CamSecure Config Setting Monitor Display Playback Option Cameras List Auto Scan Layout Playback Option: Execute Playback on the secondary monitor by checking the box. Make sure to adjust the display setting of your computer in advance to avoid system error. Cameras List: The left side displays a list of all cameras;...

  • Page 76: Save/Load Configuration

    OK to load the file. Video Source When you use LevelOne CamCon Capture Card series , like FCS-8004, you need to set up your video source before you start to activate schedule recording .

  • Page 77: Counting Application

    IP CamSecure Config Counting Application Step 1 Step 2 Step 3 Start Simulation Options Runtime *Counting Application is only in IP CamSecure Pro/Pro Plus/Pro Mega. Step 1: Check the box of the camera to apply the Counting Application on it. Step 2: In Operation section, define the detection zones you want.

  • Page 78: Log Viewer

    IP CamSecure Config Log Viewer *IP CamSecure Lite32 only has System Log option in Log Viewer. Step 4 Step1 Step 2 Step 3 Unusual Event: You can check out the history of Unusual Event that had been detected by Smart Guard System.
  • Page 79 IP CamSecure Config Log Viewer Step 1 Step 2 System Log: You can choose the log type from the drop-down menu, following is a complete list of all log types: 1. Main Console Startup 2. Main Console Shutdown 3. User Login 4.
  • Page 80 IP CamSecure Config Log Viewer - Counting Application Counting Application: Display the history of Counting Application during a given time period. Step1: Select the channel you want to check or select “All” from the drop-down menu for all channels. Step 2: You may view events happened on a particular date or during a given time period. To search and view unusual event happened on a particular date, mark the box right next to “Date”...
  • Page 81 IP CamSecure Config Log Viewer - Counting Application (Diagram): Counting Application (Diagram): Display the Counting Application data in diagram format. Step1: Select the channel you want to check or select “All” from the drop-down menu for all channels. Step 2: From the drop-down menu, set up how you would like the diagram to be displayed. You have the options of one day, one month, or one year.
  • Page 82 IP CamSecure Config Backup The backup function saves video record and other log information. User may open backup files on any PC with Windows Operation System and operate the full function Playback panel on it. Follow the instructions below to obtain backup files. Step 1 Step 1: Click on “New Period”...
  • Page 83 IP CamSecure Config Backup Step 3 Step 5 Step 4 Step 6 Step 3: Select the data you want to backup by highlighting the time period. Besides the time-table, you may also set up start time and end time in the Date Time Period section. Step 4: Click on the camera number icon to add camera(s) or click Select All to add all the cameras.
  • Page 84 IP CamSecure Config Backup Step 7 Step 7: Click the Backup icon and you can see the size of the file. Step 8: Choose the path you want to save the file or, burn the file into a CD (direct CD burning for Windows XP only).
  • Page 85 IP CamSecure Config Delete recorded information from the system Step 1: Click on “New Period” to obtain the Select DateTime Period panel. Step 1 Step 2: From the record date section, select the date you want to delete the file from. You will see color lines appear in the time table implying available data.
  • Page 86 IP CamSecure Config Step 4: Click on the camera number icon to add camera(s) or click Select All to add all the cameras. Step 5: Check the box of Enable Preview to get the preview of the video you select. Step 6: Click OK when the settings are complete and go back to the Backup panel.

  • Page 87: Network Service

    IP CamSecure Config Network Service There are 5 types of network services: live streaming server, remote playback server, 3GPP service, remote desktop and central management. From the Main Console, go to Config > Network Service to obtain the Network Service panel. *IP CamSecure Lite32 only has Live Streaming and Remote Playback in Network Service.
  • Page 88 IP CamSecure Config Kill All Clients: By clicking on this button, you may block all the clients logging to your system. Stop: Stop broadcasting live stream video. Maximum Users Port Web server Save Log Options: You may only adjust the setting when the server is stopped. Port: Assign a port for the clients to connect to your system to the network.
  • Page 89 IP CamSecure Config Live Streaming Server - Black/White List Black/White List IP Field Add/Delete Apply to All Live Streaming Servers White List: Check the box to activate White List filter. Only IPs from the White List are allowed to log-in. Black List: Check the box to activate Black List filter.
  • Page 90 IP CamSecure Config Live Streaming Server – Performance Total bitrate Individual Camera bitrate Live Streaming Server log information...

  • Page 91: Remote Playback Server

    IP CamSecure Config Remote Playback Server Kill Client Kill All Clients Star *There is only 1 channel displayed in Remote Playback in IP CamSecure Lite32 while there are up to 16 channels displayed in IP CamSecure Pro/Pro Plus/Pro Mega simultaneously. When starting the remote playback function of your computer, you allow other people to log on to the specific computer and withdraw data files that are stored on it.
  • Page 92 IP CamSecure Config Port Maximum Users Save Log Options: You may only adjust the setting when the server is stopped. Port: Assign a port for the clients to connect to your system to the network. Maximum Users: Number of connections that are allowed to connect to the Remote Playback Server.
  • Page 93 IP CamSecure Config Remote Playback Server - Black/White List Balck/White List IP Field Add/Delete Apply to All Remote Playback Servers White List: Check the box to activate White List filter. Only IPs from the White List are allowed to log-in. Black List: Check the box to activate Black List filter.

  • Page 94: 3Gpp Service

    Mobile 2003 Pocket PC Phone Edition Second Edition. Note:This feature depends on the mobile telecom service provided and the mobile phone model. LevelOne does not guarantee that this feature will work in all countries.. 1. Connect GPRS 2. Download and install the [PLATFORM4] software.
  • Page 95 IP CamSecure Config 3. Execute Main Console. 4. Press the [Config] [Network Service] [3GPP Service] [Start] 5. Open [PLATFORM4], press the button framed by red into Option...
  • Page 96 IP CamSecure Config 6. [Open Url] enter the rtsp address of the camera (EX: rtsp://195.253.21.242/media00.3gp channel 1 EX: rtsp:// 195.253.21.242/media01.3gp channel 2 EX: rtsp:// 195.253.21.242/media02.3gp channel 3) 7. [Setting I]change the setting and press “OK” [Protocol] TCP [Buffer Size] 60 [Connection TimeOut] 103 [Data Recept.

  • Page 97: Remote Desktop

    IP CamSecure Config 8. Go back to PLATFORM4, searching and then getting the video Remote Desktop When starting the Remote Desktop option of your computer, you allow remote users to use Remote Desktop Tool to login and configuration system. Option Authentication Server Status *Remote Desktop is only in IP CamSecure Pro/Pro Plus/Pro Mega and there are up to 16...

  • Page 98: Central Management Service

    IP CamSecure Config Authentication Enable this option would only allow admin account to use Desktop tool to login system. Server Status Click on Start/Stop to turn on/off this option. How to install Remote Desktop Tool Step 1: Insert the Installation CD. Step 2: Please go to RemoteDesktopViewer directly and Run Setup.exe file.

  • Page 99: Remote Live Viewer

    IP CamSecure Remote Live Viewer Remote Live Viewer With the Live Viewer console, you may watch real-time video from remote live streaming servers. *There is only 1 channel displayed in Live Viewer in IP CamSecure Lite32 while there are up to 16 channels displayed in IP CamSecure Pro/Pro Plus/Pro Mega simultaneously.
  • Page 100 IP CamSecure Remote Live Viewer Name the server Enter the server IP Enter the connecting port of the server Enter the user name and password Check the box to automatically log in the server when starting Live Viewer Test the server first to see if the settings are correct Click on the Setup icon...
  • Page 101 IP CamSecure Remote Live Viewer Setup Panel—Group You may put different cameras into the same group when utilizing the Live Streaming Server function. Step 1: Go to the Group tab of the LiveView Setting panel. Step 2: Log in to all the servers that contain the camera(s) you would like to put into the group(s).
  • Page 102 IP CamSecure Remote Live Viewer Minimize Exit Zoom Select a camera(s) from the server/ camera list on the right and then drag it to where you want the image to be displayed. On the server/ camera list, right click on a camera to connect/ disconnect it. Log In/ Log Out: Select a server or a group and click on the log in/ out icon to access/ leave the server.
  • Page 103 IP CamSecure Remote Live Viewer Other—View Real-Time Video on the Internet Server IP Remote Live Viewer Note: Must make sure the Liver Stream Server is enabled. P : Open an Internet Explorer browser and enter the IP address or DDNS “name” of the server followed by the connecting port.

  • Page 104: Dbtools

    IP CamSecure DBTools DBTools The DBTools : Export/import database/files; export configurations and edit storage location. Step 1: Execute DBTools from program files. Step 2: Enter the password of administrator to login.
  • Page 105 IP CamSecure DBTools Export database Step 1: Select the database you want to export. Step 2: Select the destination you want to export. Step 3: Press “Export” to start to export database. Step 1 Step 2 Step 3 Import database Step 1: Select the database location you want to import.
  • Page 106 IP CamSecure DBTools Export configurations Step 1: Press “Export”. Step 1 Step 2: Select the location you want to Export and type the name of the configurations. Step 3: Press “Save” to start to import database. Step 2 Step 3...
  • Page 107 IP CamSecure DBTools Edit storage location If you move the recorded videos to a new directory, to ensure the videos can still be recognized by the Playback system, you should change the original directory. Step 1: Select the original directory in the table. Step 2: Type the new path you want to save the recorded videos.

  • Page 108: Backup

    IP CamSecure Backup Backup The backup function saves video record and other log information. Users may open backup files on any PC with Windows Operation System and operate the full function Playback panel on it. Follow the instructions below to obtain backup files. Step 1: Execute DBTools from program files.
  • Page 109 IP CamSecure Backup Step 5 Step 7 Step 8 Step 8: Click the Backup icon to see the size of the file. Step 9: Choose the path you want to save the file or burn the file into a CD (direct CD burning for Windows XP only).
  • Page 110 IP CamSecure Backup Delete recorded information from the system Step 1: Click on “New Period” to obtain the Select DateTime Period panel. Step 1 Step 2: From the record date section, select the date you want to delete the file from. You will see color lines appear in the time table implying available data.
  • Page 111 IP CamSecure Backup Step 4: Click on the camera number icon to add camera(s) or click Select All to add all the cameras. Step 5: Check the box of Enable Preview to get the preview of the video you select. Step 6: Click OK when the settings are complete and go back to the Backup panel.

  • Page 112: How To Use Ip Camsecure In Vista

    IP CamSecure Backup How to Use IP CamSecure in VISTA Step 1: Start->Control Panel Step 2: Click “User Accounts” Step 3: Click “Turn User Account Control On or Off” Step 4: Disable ”Use User Account Control(UAC) to help protect your computer”, then click “OK”. Now, you can use IP CamSecure in VISTA.

This manual is also suitable for:

Camcon fcs-1070Camcon wcs-2030Camcon wcs-2070Camcon fcs-3000Camcon fcs-4000Fcs-1101 ... Show all

Table of Contents