Table of Contents
Advertisement
Move the bar to the left to reduce the sensitivity of movement
detection. Set up an appropriate Sensitivity value will reduce the
chance of false alarm. For example, you can lower the Sensitivity to
avoid the alarm being triggered by a swinging tree in the breeze.
Interval:
Click and move the slider control to the right to increase
interval time so that the alarm will only be triggered when the
movement lasts longer. Move to the left to reduce the interval time.
Region Definition:
Define detection zone:
a detection zone. Left-click and drag the mouse to draw a detection
zone. You may define more than one zone on the screen by
repeating the same process. User can also click on "All" button to
select the entire detection zone.
Define Object size:
object size and then left-click and drag the mouse to indicate the size
of the object you want to detect.
Hint:
For instance, if you want to prevent somebody from leaving a
briefcase in a hallway, you may put a briefcase in the hallway where the
camera is aiming. On the screen of the camera, draw an area that fits the
size of the briefcase and define it as the object size, and then remove the
briefcase before activating the Smart Guard function on the Main
Console. The system will consider everything in the screen normal when
you click Start to activate the monitor function.
Start Simulation:
Click the Start Simulation button and test the function on
the preview screen.
4.1.6 Camera Event - Missing Object
- Alarm will be set off when an object disappears in the defined
area on the screen.
To detect General Motion, you have to define
After defining the detection zone, select Define
IP CamSecure
4. Guard
Advertisement
Table of Contents
