Table of Contents
Advertisement
Enable Event:
Check the box to activate the event.
Life Cycle:
Automatically cancel event when event disappears:
alarm/action will be cancelled once the abnormality is fixed or ends.
Manually cancel event or event continues triggered:
alarm/action will continue until being
canceled from the Main Console. The
user currently not at the seat watching
the screen will be notified by the alarm.
Note:
To cancel the event: Click
Start>Open Event Report>Cancel All
Events
Cancel event after timeout xx seconds:
Enable checkbox and setup the
timeout seconds to cancel the event
after the time that you set whatever
the events disappear or not.
4.1.3 Camera Event - Signal Lost
- Detect the loss of video signal from
camera.
4.1.4 Camera Event - General Motion
- Detect any movement in the defined detection zone.
Sensitivity
Interval
Region Definition
Start Simulation
Alarm Event Option:
Sensitivity:
Click and move the slider control to the right to increase
IP CamSecure
4. Guard
the
The
Advertisement
Table of Contents
