Table of Contents
Advertisement
STARTING YOUR PRESSURE WASHER
1. Turn the water supply on, making sure that the tap is fully open.
WARNING: FAILURE TO TURN ON THE WATER COULD CAUSE DAMAGE TO
THE PRESSURE WASHER.
2. Set the choke lever to the OPEN
position.
3. Set the fuel supply valve to the
open position.
4. Slide the throttle lever to the left
approximately 3/4 of the way.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
11
Hide quick links:
Advertisement
Table of Contents
