Before Storing The Pressure Washer; Storage Procedure - Clarke TIGER 2500 Operation & Maintenance Instructions Manual

3. Turn off the engine switch, to the
off (0) position.
4. Turn water supply off at the tap.
5. NEVER turn the water off with the
engine running.
6. Release the pressure in the pump
and hose by squeezing the trigger
for a few seconds until no more
water comes out of the nozzle.
7. Turn the fuel supply valve to the
closed position.
8. Rotate the trigger lock to the
locked position.
STORAGE

BEFORE STORING THE PRESSURE WASHER

1. Disconnect the high pressure hose and drain all water from the hose.
2. Coil the hose and store the lance/hose in their respective holders located
on either side of the pressure washer.

STORAGE PROCEDURE

Make sure that the pressure washer has been thoroughly cleaned before
storing it in a clean dry place. See "Maintenance" on page 16.
For long term storage See page 18.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
15