Cleaning The Fuel Strainer; Cleaning The Air Filter - Clarke TIGER 2500 Operation & Maintenance Instructions Manual

CLEANING THE FUEL STRAINER

Just inside the fuel tank is a fuel strainer, check this periodically and remove
any contaminants which may have accumulated.
1. Open the fuel tank cap.
2. Remove the fuel strainer.
3. Remove any contaminants.
4. Replace the fuel strainer.
• Do not operate pressure
washer without fuel strainer
properly installed.

CLEANING THE AIR FILTER

1. Release the two clips on the air
filter cover.
2. Remove the air filter cover.
3. Remove the air filter elements.
4. Wash the elements in a solution of warm water and mild detergent.
WARNING: DO NOT USE FLAMMABLE SOLVENTS OR PETROL TO CLEAN THE
AIR FILTER
5. Rinse thoroughly and leave the elements to dry. Once it is completely dry,
immerse the filter in clean engine oil and sqeeze to remove excess oil.
• If the air filter is damaged contact Clarke spare parts department for
a replacement.
• Replace the filter into its original position and refit the air filter cover.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
17