Connecting The Handle; Connecting The Wheels - Clarke TIGER 2500 Operation & Maintenance Instructions Manual

ASSEMBLY
Unpack your pressure washer and check to ensure the following items are
present.
Contact your Clarke dealer immediately if any parts are missing or damaged.
• 1 x Petrol Pressure Washer
• 1 x Hose Holder c/w Fixings
• 1 x Lance Holder c/w Fixings
• 1 x High Pressure Hose
• 1 x Lance Assembly
• 1 x Gun Assembly

CONNECTING THE HANDLE

1. Slide the upper handle into
position as shown.
2. Secure using a bolt, 2 washers and
a nut on each side.

CONNECTING THE WHEELS

1. Slide the axles in to the locating
tube as shown
• Make sure the ball catch locks
into the small hole on the
bottom of the locating tube.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
• 1 x Spark Plug Box Spanner
• 1 x Tommy Bar
• 2 x Wheel & Axle Assemblies
• 1 x Nozzle Cleaning Pin
• 1 x Tap Adaptor
• 1 x Upper Handle c/w Fixings
6