Tone Selection; Group Buttons (A-D); Bank And Tone Buttons (1-8) - Roland KIWI-3P Manual

Tone Selection

Group Buttons (A-D)

Bank and Tone Buttons (1-8)

The buttons 1-16 have been split into two groups of 8. The buttons 1-8 are the BANK Selection buttons and the buttons
9-16 are the TONE Selection buttons 1-8. See the Front Panel layout on page 5. All tones have a Group, Bank and Tone
ID. The first tone has the location A:1:1, the second is A:1:2 and the last is P:8:8.
The Group, Bank and Tone buttons will light to show the selection.
Note - The memory protection switch on the rear of the 3P will prevent memory writing. The write button will not function
if the rear panel switch is in the middle position.
All the Tone lights will flash once if a write is attempted with the protect on.
You can only select one tone at a time
All tones on all banks can be edited and programmed (1024 in total)
www.kiwitechnics.com
There are 16 Groups of 64 Tones in the Kiwi-3P matrix. Each group is made up of 8
Banks of 8 Tones giving a total of 1024 Tones (16x8x8). As there are only 4 Group
buttons there are 4 layers of Groups. The current Group layer is changed by
pressing the currently selected Group button again. For example to change from
Group A to Group E press the Group A button when it is lit. One more press of the
same button will select Group I and another press will select Group M. Another
press will return you to Group A.
The Group lights will show which Group is selected as follows
Group Layer 1 (Groups A-D)
Group Layer 2 (Groups E-H)
Group Layer 3 (Groups I-L)
Group Layer 4 (Groups M-P)
Selected Group On Steady - others Off
Selected Group On Flashing - others Off
Selected Group Off - others On Steady
Selected Group Flashing - others On Steady
Kiwi-3P Matrix Upgrade User Manual v1.2
10