Advanced Menu / Change Password - GE SymDec 4 User Manual

Use this menu to enter the Factory Password, and restore the unit to the factory defaults. The Factory reset
password is 8111.
Use the Up/Down Arrow keys to select a character, then use the Enter button to complete the selection, and
move to the next character.
Clicking the Enter button on the last character will complete the password selection and return the unit to the
factory default configuration.
Note: The unit's current IP addresses will not reset to the factory settings.

Advanced Menu / Change Password

Use this feature to change the Operator, Ethernet, or DDNS passwords.
Figure 91. The password selection menu
Changing the Operator (Advanced menu) Password
To change the password:
1. Highlight the Operator password, then click the Enter button. A password box will appear.
2. Enter the new password using the Up/Down Arrow keys to select the number then click enter to move
to the next field. clicking enter on the last number field will open the confirmation box.
3. Re-enter the password.
4. Highlight OK, then click the Enter button. The user will be prompted, indicating if the password was
entered correctly and changed.
The Ethernet Password
The Ethernet Password feature limits access to only those users who access the unit using the password feature
of SymNav software. When the unit is first setup, the default is No Password Protection. Meaning, anyone
using SymNav software and accessing with an ethernet connection can connect to the unit.
Activating the Ethernet Password
1. Enter the new password using the Up/Down Arrow keys.
2. Highlight OK, then click the Enter button.
77