GE TruVision DVR 30 Quick Start Manual

Dvr
Hide thumbs Also See for TruVision DVR 30:

Advertisement

Quick Links

GE
Security
TruVision DVR 30 Quick Start Guide
Content

Contact information

For contact information see our Web site:
www.gesecurity.com.

Package contents

The TruVision DVR 30 (model TVR 30) is shipped with the
following items:
IR (infrared) remote control
Two AAA batteries
USB mouse
Power cord
TruVision DVR 30 Quick Start Guide
The support CD includes the following items:
TruVision DVR 30 User Manual
TruVision DVR 30 Quick Start Guide
TruVision DVR 30 Quick Chart
Video player application
Record duration calculator

Installation environment

Refer to the user manual for detailed information, but
observe these important requirements:
Place the TVR 30 in a secure location.
Ensure that the TVR 30 is in a well-ventilated area.
Do not expose the unit to rain or moisture.

Setting up the TVR 30

To quickly put the TVR 30 into operation:
1.
Connect all the devices required to the back panel of
the TVR 30. See Figure 1 on page 2.
2.
Turn on the unit using the power switch on the back
panel. After the boot up screen, the TVR 30 displays
video images on-screen.
3.
Press the Menu button on the front panel to access the
main menu. The log on screen appears.
4.
Enter the default user ID and password.
User ID: admin
Password: 1234
5.
Modify the TVR 30 preconfigured settings as required,
using the various dialog screens. (See "TVR 30 screen
map" on page 8.)
6.
When customization is complete, press Esc to exit the
main menu and return to live mode.
© 2009 GE Security, Inc.
P/N 1068703 • REV B • ISS 16DEC09

Advertisement

Table of Contents
loading

Summary of Contents for GE TruVision DVR 30

  • Page 1: Table Of Contents

    Press the Menu button on the front panel to access the main menu. The log on screen appears. Package contents Enter the default user ID and password. The TruVision DVR 30 (model TVR 30) is shipped with the User ID: admin following items: Password: 1234 •...
  • Page 2: Connecting The Devices

    Turn on the TVR 30 using the power switch on the back Record Blinking indicates that the TVR 30 is recording. panel. When you turn on the device, the TVR 30 Steady indicates hard drive failure. TruVision DVR 30 Quick Start Guide...
  • Page 3: Control Options

    On the remote control, press the DVR ID button, and Enter to confirm the selection or display then press the 1 button. additional screens. The remote control is now operational. USB ports Connect USB devices. CD/DVD drive Insert media for archiving. TruVision DVR 30 Quick Start Guide...
  • Page 4: Ddns Settings

    When using the TVR 30 Web browser interface, In the Submit/Update box, select Yes to submit the you can install ActiveX controls to connect and view video DDNS information through the network. using Internet Explorer. However, you cannot download TruVision DVR 30 Quick Start Guide...
  • Page 5: Live Mode

    You can only display the PTZ control interface while in (DVD), insert the disc into the DVD drive. If both media live mode. are found in the TVR 30, the USB device takes precedence over the DVD. TruVision DVR 30 Quick Start Guide...
  • Page 6: Logging On

    Use the mouse, remote ID, network address, firmware and FPGA version, and control, or front panel to navigate through the menu MAC addresses. commands and display the configuration screens. To TruVision DVR 30 Quick Start Guide...
  • Page 7: Setting Up Alarms

    Select Restart to restart the unit or Shutdown to turn Setting up alarms off the unit. See the TruVision DVR 30 User Manual for more information Battery removal on alarm handling. The TVR 30 unit contains one 3V Lithium battery. This...
  • Page 8: Tvr 30 Screen Map

    TVR 30 screen map displayed only TruVision DVR 30 Quick Start Guide...

Table of Contents