GE SymDec 4 User Manual page 80

74 SymDec 4
User Manual
Figure 84. Streaming settings menu
Advanced Menu / Communications / Streaming Advanced
Use this menu to configure the receiver and sender control settings. Both the receiver and senders settings must
match exactly. Select from the following menu options:
• Receiver Control Enable: Select from Enable or Disable.
• Receiver Control Port: Select the receiver control port. 8092 is the default. Contact your company's
IS professional for available ports.
• Sender Control Enable: Select from Enable or Disable.
• Sender Control Port: Select the port for the stream. 8092 is the default. Contact your company's IS
professional for available ports.
Figure 85. The streaming advanced setup menu