Selecting a Start and Stop Time
1. Using the Arrow buttons to navigate, highlight the TIME parameter, then press the Enter button. The
unit will enter Edit mode.
2. Use the Arrow buttons to change the start and stop time values. Use the Arrow buttons to navigate
among the different parameters.
3. To activate the start or stop time parameter, use the Arrow buttons to place an [X] in the check box.
4. Press the Enter button at any time to exit Edit mode.
Searching for Recorded Alarms
1. Using the Arrow buttons to navigate, highlight the ALARM parameter, then press the Enter button.
The unit will enter Edit mode.
2. Use the Arrow buttons to activate the alarms search, by placing an [X] in the check box.
3. Press the Enter button at any time to exit Edit mode.
Starting the Search
Using the Arrow buttons to navigate, highlight the [START SEARCH] parameter, then press the Enter
button. The Search Results menu will appear.
Figure 33. The search results screen
Selecting from the Search Results
Use the Arrow buttons to select a recorded event.
Press the Enter button to select the event, or press the Menu button to exit the Search Results menu.
39
Need help?
Do you have a question about the SymDec 4 and is the answer not in the manual?