Table of Contents
Advertisement
Advanced Menu / Disk Overwrite Mode / No Overwrite
Functions of No Overwrite mode:
•
Recording always starts at end of last recording.
•
Recording stops when end of disk is reached (when disk is full).
•
When the end of the disk is reached, the unit displays an on-screen message indicating that the disk is
full, and the unit has stopped recording. User must acknowledge the on-screen message by pressing
the Enter button.
•
Unit will not record over previously recorded data. To continue recording, the data must be erased (or
deleted) in the Advanced / Disk Maintenance menu.
Advanced Menu / Disk Overwrite Mode / Overwrite Once
Functions of Overwrite Once mode:
•
Recording always starts at end of last recording.
•
The unit overwrites all previously recorded data.
•
Recording stops before the unit overwrites any of the newly recorded data (data from the current
record session).
•
When the end of the disk is reached, the unit displays an on-screen message indicating that the disk is
full, and the unit has stopped recording. User must acknowledge the on-screen message by clicking
the Enter button.
•
The unit will continue recording again when the user clicks the Record button.
Advanced Menu / Disk Overwrite Mode / Continuous Overwrite
Functions of Continuous Overwrite mode:
•
Recording always starts at end of last recording.
•
The unit overwrites all previously recorded data.
•
The unit overwrites newly recorded data (data from the current record session).
•
Unit never stops recording.
Advanced Menu / Disk Maintenance
Figure 66. The disk maintenance menu
61
Advertisement
Table of Contents
