Main Menu / Alarms / Relay Configuration
Figure 53. The relay configuration menu
Use this menu to configure each relay output as either:
•
Normally Open
•
Normally Closed
Main Menu / Alarms / Video loss Action
Figure 54. The video loss action menu
Use this menu to configure how the unit responds to video loss.
•
Camera: Select the camera you wish to configure.
•
Relay 1: If enabled, the unit will activate Relay 1 when video loss
is detected.
•
Relay 2: If enabled, the unit will activate Relay 2 when video loss is
detected.
•
Buzzer: Use this setting to disable the video loss buzzer activation on a per camera basis. To disable
video loss buzzer activation on all cameras go to the Main Menu → Alarms → Buzzer Setup menu,
described in the previous pages.
51