Rechargeable Battery And Power Adaptor - Microlife WatchBP office Instruction Manual

Software commands
Perform a measurement Click «Measure»
Stop a measurement Click «Stop»
Store data Click «Save»
View data Click «View Memory»
Close Click «Close»
Please read the software menual to know more details of the software operation commands.
*
31
Refer to the software user manual for detailed information and instructions.

Rechargeable battery and power adaptor

Rechargeable Battery
WatchBP Office ABI equips with a built-in,
rechargeable Ni-MH battery pack which delivers up to
400~500 measurement cycles. The batteries can be
recharged while the power adaptor is plugged in. It
doesn't affect the measurement.
First time use , charge
*
the batteries until the
recharge indicator turns
to green
ROUTINE
AUSCULT.
An orange recharge
*
SCREEN
indicator means recharge
IAD
MAP
in progress.
A green recharge
*
indicator means recharge
is completed.
Using a power adaptor
Please only use the Microlife adaptor supplied with
the WatchBP Office ABI to recharge the device.
1) Plug the adapter cable into the Power Plug of the
WatchBP Office ABI device.
2) Plug the adaptor plug into the wall socket. When
the power adaptor is connected, no battery
power is consumed.
DC 7.5V 2.0A
DC 7.5V 2.0A
32
EN