Viewing, Deleting And Transferring Measurements - Microlife WatchBP office Instruction Manual

Viewing, deleting and transferring Measurements (cont.)
Viewing MAP and PP values –
Ten seconds after display of the average blood
pressure value, the values for Pulse Pressure (PP)
and Mean Arterial Pressure (MAP) are displayed.
SCREEN
SCREEN
10
seconds...
29
Deleting measurements
1) All the data in different modes can be deleted.
2) Press the M Button and hold it for 12 seconds
until the he "CL" symbol is displayed; then
release the M Button
3) Press the M Button again while the "CL" symbol
is flashing. The deleting is confirmed by the beep
sound.
Press and hold for 12
seconds...
Transferring measurements
Installation of the software program
1) Put the CD in the CD-ROM drive of your
computer or click on « » in the CD's
setup.exe
directory alternatively.
2) Follow the instructions provided in the
installation window on the computer screen.
3) When installation is finished, be sure to
restart the computer before you start working
with the program.
System Requirements:
*
550MHz CPU. 256MB Memory,
1024x768 pixel resolution,
WatchBP Analyzer Office ABI
Version 2.0.0.2 256 color, CD-ROM drive, 1
free USB port, 40MB free hard
Install CD
disk space, Microsoft Windows
System Requirements: 550MHz CPU. 256MB Memory, 1024x768
pixel resolution, 256 color, CD-ROM drive, 1 free USB port, 40MB
free hard disk space, Microsoft Windows 2000 / XP / Vista.
2000 / XP / Vista.
Transferring data to the computer
1) Start the software program and connect
the device to the computer using the cable
supplied.
2) A successful connection is displayed by
«Connected» on the computer screen.
3) Enter identity number, Patient Name and
Surname to create a new record.
30
EN