Bluetooth Connectivity; Pairing The Device; Rechargeable Battery And Power Adaptor; Rechargeable Battery - Microlife WatchBP Office Vascular Instruction Manual

Bluetooth connectivity

Pairing the device

Press and hold the
seconds, until the Bluetooth icon flashes and
starts the pairing mode. The unique 6-digit
device ID of the unit is displayed. Connect the
device and confirm pairing. The Bluetooth icon
is displayed on the LCD screen of the device to
show the presence of a Bluetooth connection.
Whilst Bluetooth is connected, it allows the
use of the WatchBP Analyzer to program the
device and/or start the measurements. When
the measurements are finished the data is
automatically uploaded to the App.

Press and hold the
then press button again to clear the connection.

Rechargeable battery and power adaptor

Rechargeable Battery

The device has a built-in, rechargeable Ni-
MH battery pack that can perform up to 400
measurement cycles on a full charge. The battery
can be recharged using the power adaptor provided
with the device. The empty battery indicator is
displayed when the battery is low.
• When using the device for the first time, charge
the battery until the recharge indicator is off.
• The green recharge indicator indicates that the
recharge is in progress.
• When the green recharge indicator is off, it means
the recharge is complete.
• When the green recharge indicator flashes, it
means that there is a charging error. Make sure
that the correct Mains Adaptor is used. If the
condition persists, contact Microlife or the local
distributor.
16
button for around 7
button for 5 seconds displays CL,