Abi» Mode - Microlife WatchBP office Instruction Manual

Ankle-brachial index and simultaneous dual arm measurement function for accurate office blood pressure measurement

Hide thumbs Also See for WatchBP office:

Table of Contents

Enlarged version

Setting measuring intervals in «ROUTINE»

Mode

1) Pressing and holding the Start/Stop Button for 3

seconds.

Press and hold

for 3 seconds...

2) Press the M Button to adjust the measurement

interval, then press the Start/Stop Button to

confirm, the device will go back to stand-by

Mode.

AUSCULT

15 30

The default measuring interval is 15 seconds. The

interval can be set as 15, 30, 45 or 60 seconds.

«ABI» Mode

1) Turn on the power – Turn on the device by

switching the I/O switch at the back of the

device into the ON position.

DC 7.5V 2.0A

2) Switch to «ABI» Mode – Slide the Mode Switch

to «ABI» Mode. The supine position reminder will

display.

ABI

ABI ROUTINE SCREEN

3) The patient has to lie down in supine position.

4) Apply the cuff* – Properly fit the arm cuff to the

upper arm and the ankle cuff to the leg of the

preferred measurement side of the body. The

preferred side is determined in «SCREEN» Mode.

5) Make sure the upper arm cuff is connected to the

left cuff socket and the ankle cuff is connected to

the right cuff socket.

Additional visual instruction can be found on the cuff.

ABI ROUTINE SCREEN

Table of Contents