Technical Specifications - Microlife WatchBP office Instruction Manual

Device care
Clean the device with a soft, dry cloth.
Accuracy test
We recommend the WatchBP Office ABI device
be tested for accuracy every 2 years or after
mechanical impact (e.g. being dropped). Please
contact Microlife to arrange for an accuracy test.
37
Cleaning the cuff
DO NOT wash the cuff. DO NOT iron the cuff cover.
Do not wash the cuff!
Do not iron the cuff!
Disposal
Batteries and electronic instruments must be
disposed of in accordance with the locally applicable
regulations, and not as domestic waste.

Technical specifications

Operation temperature/
•
humidity: 10 to 40 °C (50 to 104 °F)
•
Storage temperature/
-20 to 55 °C (-4 to 131 °F)
humidity:
•
15 - 90 % relative maximum humidity
•
Weight:
1100 g (including rechargeable
battery pack)
•
Dimensions:
200 x 125 x 90 mm
•
Measuring method:
Oscillometric, corresponding to
Korotkoff
•
Measurement range: 30 - 280 mmHg – blood pressure
•
40 - 200 beats per minute – pulse
•
Cuff pressure display: Range: 0 - 299 mmHg
•
Resolution: 1 mmHg
•
Static accuracy: pressure within ± 3
mmHg or 2% of reading > 200mmHg
•
Pulse accuracy: ±5 % of the readout
value
•
Voltage source: Rechargeable battery pack;
4.8V C4000 mAh
•
Mains adapter DC 7.5V, 2 A
Reference to Standards: • Device corresponds to the
requirements of the standard for non-
invasive blood pressure monitor.
EN 1060-1
EN 1060-3
EN 1060-4
IEC 60601-1
IEC 60601-1-2
Electromagnetic • Device fulfills the stipulations of the
standard IEC 60601-1-2.
compatibility:
The stipulations of the EU Directive 93/42/
EEC for Medical Devices Class IIa have been
fulfilled.
Type BF applied Reference number
part
Serial number Manufacturer
Microlife reserves the right to alter technical
specfications without prior written notice.
38
EN