Reboot The Paging Amplifier - CyberData 11085 Operation Manual

2.3.4 Reboot the Paging Amplifier

To reboot a Paging Amplifier, log in to the web page as instructed in
Configuration Home
1. Click Update Firmware to open the Upgrade Firmware page
2. Click Reboot. A normal restart will occur and you will see the following Reboot page.
Operations Guide
Page".
Figure 2-17. Reboot System Section
Reboot
Figure 2-18. Reboot Page
930363B
Installing the VoIP V2 Paging Amplifier
Configure the Paging Amplifier Parameters
Section 2.3.2, "Log in to the
(Figure 2-17).
CyberData Corporation
23