Upgrade The Firmware And Reboot The Paging Amplifier - CyberData 11085 Operation Manual

2.3.3 Upgrade the Firmware and Reboot the Paging Amplifier

To upload the Paging Amplifier firmware from your PC:
1. Set up a TFTP server.
If you do not already have a TFTP server running on your network, see
a TFTP
2. Retrieve the latest Paging Amplifier firmware from the VoIP V2 Paging Amplifier Downloads
page at:
http://www.cyberdata.net/products/voip/digitalanalog/singlewirepagingampv2/downloads.html
3. Unzip the Paging Amplifier version file. This file may contain the following:
•
•
4. Copy the firmware files to be upgraded to the appropriate TFTP server directory:
•
•
5. Log in to the Paging Amplifier home page as instructed in
Configuration Home
Operations Guide
Server".
Firmware file
Release notes
c:\tftp-root\for Windows
/tftpboot/for Linux
Page".
930363B
Installing the VoIP V2 Paging Amplifier
Configure the Paging Amplifier Parameters
Appendix B, "Setting up
Section 2.3.2, "Log in to the
CyberData Corporation
20