Install Ceramic Walls (530Il And Ic Only) - Valor Portrait 530ILN/ILP Installation & Owner's Manual

QUALIFIED
INSTALLER

Install Ceramic Walls (530IL and IC only)

The 530IL and 530IC engines are provided with a set of
reversible walls. One side shows the brick pattern and
the reverse side shows a black vertical fl uted pattern.
Follow the instructions below to install the wall set on
the chosen side.
• For ceramic walls installation for 530IR engine,
see Ceramic Rocks Installation section in this
manual.
• At this point, you can install the 567FGP Top
Grille, if used (logs or rock version only)
• The 567FGP Top Grille is sold separately except
with the 569 Ledge Front Kit or 575/578 Lift Kit.
1
32
Installation
1. Locate the ceramic rear wall in the channel at back
of the fi rebox and fl at against the back of the fi rebox.
2. Locate the sidewalls in the channels at the sides of
the fi rebox.
3. Remove two screws from under the top front of the
fi rebox. Using these screws fi t the port cover.
2 3