Installation Planning - Valor Portrait 530ILN/ILP Installation & Owner's Manual

QUALIFIED
INSTALLER
10"
10"
7-5/8" dia.
collar
3" Inlet & Exhaust
Collars
559CLT Co-Linear Vertical Ter-
minal
Alternate to 556CLA/559CLT/559FSK Conversion for vertical termination
Co-Axial to Co-Linear
Adapter
Installer—READ THIS FIRST
Only qualifi ed licensed or trained personnel
should install this appliance.
1. YOU NEED TO KNOW FROM THE
HOMEOWNER:
•
What type of installation - free standing / zero
clearance (ZC) / insert;
•
What front / stove is used with the engine;
•
What is the required cavity size and hearth
fi nish - see front / stove casing installation
manuals;
•
What are the thickness and type of wall fi nish
around the fi rebox opening (ZC)
•
What are the optional accessories to be
installed with this fi replace if any;
•
What is the venting confi guration - top / rear /
co-linear
2. Unpack the appliance, removing all items packed
inside and around the appliance.
3. Check that you have everything, using the Pack
Content sheet. Also check that you have the front /
stove casing, ceramic walls and fuel bed, optional
accessories.
4. Remove the window of the appliance.
28
Co-Linear Venting
559FSK Flashing Kit
Terminal Cap

Installation Planning

Front Rear
720SWK Sidewall Horizontal Terminal
—for logs or rocks units only
Co-Linear to Co-Axial
Adapter
Flashing
5. Convert the vent outlet if necessary.
6. Place the appliance in fi nal position.
7. Install the venting system and tape vent pipe joints.
8. Position the restrictors.
9. Connect the electrical wiring for optional electric
accessories if used.
10. Install the optional electric accessories if used.
11. Connect and test the gas supply.
12. Install the liners.
13. Install the fuel bed.
14. Refi t the window and the hot glass safety plate if
removed.
15. Install the control wall switch kit.
16. Initialize the remote control system.
17. Verify the operation and adjust aeration settings.
18. Install the remote control handset wall holder.
19. Instruct the homeowner on the operation and
maintenance of the fi replace.
20. Finish the wall around the fi replace if necessary.
21. Install the front trim and barrier screen.