Install Ceramic Walls And Rocks (530Ir) - Valor Portrait 530ILN/ILP Installation & Owner's Manual

Install Ceramic Walls and Rocks (530IR)

The ceramic rock set is packed in three cartons. Unpack each piece carefully to avoid damages. You should have in
hand the following items:
1. Remove the three black screws from the rear panel
inside the fi rebox.
2. Place the rear panel support and fi x it with the three
screws removed in 1.
If installing the 567FGP Top Grille (sold
separately), fi t it now. See instructions supplied
with the grille.
3. Place the rear panel on the rear support as
indicated. Hold in place and go to next step.
4. Place the left and then the right panels in the fi rebox
showing the black fl uted sides.
Installation
Carton 4001879
• Ceramic platform
Carton 4002055
• Left and right side
reversible brick/fl uted
ceramic panels
• Rear panel support
5. Place the rock base behind the burner. The two
protrusions in front of the base
should rest on the burner
Back Panel
Burner
ROCK
BASE
Rest the rock base
behind the burner
on its bracket flanges
6. Place the ceramic platform over the burner and
around the rock base with the pegs on the top. The
rear part of the platform should
overlap the edges of the rock
QUALIFIED
INSTALLER
Carton 4002054
• Rear fl uted panel
• Ceramic base for rocks
• 12 ceramic rocks
mounts as indicated.
Rock base
support
Burner
bracket
SIDE VIEW
base on each side.
Front edge of platform rests on
top of sheet metal lip
35