Installing The Drivers - Advantech POC-S199 Series User Manual

If required, insert your operating system's installation or setup diskette into the exter-
nal diskette drive until the release button pops out.
The BIOS supports system boots up directly from the CD-ROM drive. You may also
insert your system installation CD-ROM disk into your external CD-ROM drive.
Power on or reset the system by pressing the "F2 or Del" key to boot into the BIOS
menu and adjust the boot device sequence.
You can also press F12 key when booting; a bootable device popup menu will
appear, you can select the bootable device that you want. The Point-of-Care Terminal
will automatically load the operating system from the diskette or CD-ROM.
If you are presented with the opening screen of a setup or installation program, follow
the instructions on screen. The setup program will guide you through preparation of
your hard drive, and installation of the operating system.
2.5

Installing the Drivers

After installing your system software, you will be able to set up the chipset, graphics,
ethernet, audio, and touchscreen functions from your own external CD-ROM drive.
All the drivers except the CD-ROM drive driver are stored in a CD-ROM disc entitled
"Drivers and Utilities."
The standard automatic installation procedures for installing the chipset, graphics,
audio, ethernet, TXE and touch drivers are described in Chapter 3.
The various drivers and utilities in the CD-ROM disc have their own text files which
help users install the drivers and understand their functions. These files are a very
useful supplement to the information in this manual.
Troubleshooting:
If the system behaves abnormally, such as:
1. Failure to power on
2. Failure to power off
3. Power LED ON but no DC power output
4. AC power is on and all switches ON, but system doesn't power on
Contact your distributor, sales representative, or Advantech's customer service cen-
ter for technical support if you need additional assistance. Please have the following
information ready before you call:
 Product name and serial number
 Description of your peripheral attachments
 Description of your software (operating system, version, application software,
etc.)
 A complete description of the problem
 The exact wording of any error messages
 Symptoms, photo or video if available.
13 POC-S199 Series User Manual