Adjusting the Back Height
NOTE: For this procedure, refer to FIGURE 10.2.
1. Remove the two mounting screws and locknuts securing the push handle to the back
cane.
2. Align the push handle mounting holes with the desired back cane mounting holes.
3. Secure the push handle to the back cane using the two mounting screws and locknuts.
Torque to 75 in‐lbs ± 20%.
Back Cane
Part No 1143238
Push Handle
Back Cane
Mounting Holes
Locknuts
FIGURE 10.2 Adjusting the Back Height
SECTION 10—JUNIOR BACKS
Push Handle
Mounting Holes
Mounting
Screws
57
Adjustable ASBA Seat